Printer Genie Ltd
Brother D00N0A001 220V Fuser Unit — 6-Month Warranty & GenieCare™ Expert Support
Brother D00N0A001 220V Fuser Unit — 6-Month Warranty & GenieCare™ Expert Support
Couldn't load pickup availability
Refurbished
UK refurbishment specialist Rebuilt and warranted GenieCare™ support included
Brother D00N0A001 220V Fuser Unit — 6-Month Warranty & GenieCare™ Expert Support
Direct-Fit Refurbished Fuser for Brother HL-L3210CW & HL-L3230CDWRestore consistent print quality with a professionally refurbished 220-240V UK-spec fuser unit — 6-month warranty and GenieCare™ Expert Support included.
|
 |
Availability & Lead Time
Ready to Ship — held in stock, order by 2pm for same-day despatch (next working day if the cut-off's been missed). Refurb to Order — rebuilt specifically for your order, ships in approx. 6-8 working days. Choose your option above using the dropdown next to the price. We don't refurbish this part until it's ordered unless we're holding ready stock, so every unit is properly stripped down and rebuilt rather than reconditioned in bulk ahead of time.
Why Buy This Fuser from Printer Genie?
| 6-month Printer Genie warrantyCovers refurbishment defects and component failure under normal use. Full warranty terms are available in our Terms of Service. | GenieCare™ support included30 days installation guidance, fuser counter reset help, and fault diagnosis support from real printer specialists. |
| Professionally refurbished by Printer GenieEvery unit is fully stripped down and rebuilt with new components as standard before despatch. | Help if the fault is not the fuserIf the supplied fuser does not fully resolve your printer issue, we will help diagnose the remaining fault and recommend the next steps. |
Is This the Right Fuser Unit?
| You're seeing smudging or toner rub-offToner that wipes off the page or smears when touched is the classic sign of a failing fuser. The fuser is responsible for bonding toner to paper using heat — when it fails, toner never properly fuses. | Your printer shows a self-diagnostic or "cover is open" fuser errorA self-diagnostic message about the fuser not reaching temperature, or a fuser cover error that won't clear, often indicates the fuser has failed. Fitting a replacement fuser resolves these faults. |
| You're seeing ghosting or repeated imagesA faint repeated shadow of previously printed content appearing lower on the page (ghosting) often points to a worn fuser roller or fuser film. A new fuser unit resolves this in most cases. | Proactive maintenance or high page countIf you're approaching 150,000 pages or your maintenance schedule includes the fuser, replacing it now avoids print quality issues and unplanned downtime. Good practice on heavy-use machines. |
| Paper curling or wrinkling after printingIf pages are coming out curled, wrinkled, or wavy, the fuser is applying uneven heat or pressure. This is a mechanical sign of fuser wear rather than a print quality issue. | Not sure? Ask us firstIf you're unsure whether the fuser is the right part to fix your issue, contact us before ordering. Our team can help diagnose the fault — we'd rather help you buy the right part than the wrong one. |
Specifications
| Component | Fuser unit (complete assembly) |
| Primary OEM part number | D00N0A001 |
| Condition | Refurbished |
| Availability | Ready to Ship (same-day if ordered by 2pm) or Refurb to Order (approx. 6-8 working days) — select above near Add to Cart |
| Rated life | 150,000 pages |
| Compatible printers | Brother HL-L3210CW, Brother HL-L3230CDW (UK/EU 220-240V models) |
| Fuser counter reset required | Yes — reset via the printer's maintenance mode (Function Code 88) after fitting (see Installation Notes) |
| Weight & delivery | 1kg — courier delivery, tracked |
Compatible Printers
This fuser unit fits the UK/EU 220-240V versions of the following Brother models. If your model is not listed, contact us before ordering — we may be able to confirm compatibility.
| Model | Part Number Confirmed | Notes |
| Brother HL-L3210CW | D00N0A001 | Uses Brother TN-243/TN-247 toner |
| Brother HL-L3230CDW | D00N0A001 | Uses Brother TN-243/TN-247 toner |
Not the right model? We also stock a fuser for the larger HL-L3270CDW / HL-L3290CDW / MFC-L3750CDW / MFC-L3770CDW range (D00N0C001) — this is a different physical part, not interchangeable with this one.
What's Included
- 1 × Brother HL-L3210CW / HL-L3230CDW fuser unit (D00N0A001)
- 6-month Printer Genie warranty for refurbishment defects and component failure under normal use
- 30 days GenieCare™ Expert Support — installation guidance included from date of purchase
- GenieCare™ Expert Support continues when you order toner from us
Installation Notes
Important — fuser units get very hot during normal operation. Always power off the printer and allow the fuser to cool fully before handling. Do not touch the fuser roller surface.
- Power off the printer and disconnect from the mains. Allow at least 30 minutes to cool.
- Open the back cover to access the fuser unit.
- Release the fuser locking levers and slide the old fuser unit out carefully — dispose of responsibly.
- Insert the new fuser unit and engage the locking levers until they click. Close the back cover.
- Reconnect power and power on.
- Enter maintenance mode and use Function Code 88 to reset the fuser counter — select "Fuser Unit," enter the last digit of the machine's serial number when prompted, and confirm. GenieCare™ Expert Support can talk you through this if you're not sure.
If you need help at any step, our team is available. Contact us via the GenieCare™ Expert Support channel — installation guidance is included with this purchase.
Warranty & Support
6-month Printer Genie warranty — covers refurbishment defects and component failure under normal use. Does not cover accidental damage, incorrect installation, misuse, electrical or physical damage, contamination, use in an unsuitable printer, or wear beyond expected service life. Full terms in our Terms of Service.
30 days GenieCare™ Expert Support included free — installation guidance, counter reset help, and diagnosis if the fault isn't fully resolved. Order Brother toner from Printer Genie after fitting and support continues automatically — no subscription, no sign-up.
GenieCare™ Expert Support is separate from and in addition to the warranty — it covers remote diagnosis and advice, not on-site repair.
GenieCare™ Expert Support – Included with This Part
Frequently Asked Questions
