Printer Genie Ltd
HP 178 179 Samsung CLP365 CLX3305 Transfer Belt Blade Only — 90-Day Warranty
HP 178 179 Samsung CLP365 CLX3305 Transfer Belt Blade Only — 90-Day Warranty
Couldn't load pickup availability
HP 178 179 Samsung CLP365 CLX3305 Transfer Belt Blade Only
Compatible transfer belt cleaning blade for selected HP Colour Laser and Samsung colour laser printers — blade only, no waste toner section
Fixes Colour Streaks, Toner Haze, and Repeating Marks
A worn or contaminated transfer belt cleaning blade leaves toner behind on the transfer belt surface as it moves through the printer. That leftover toner shows up as vertical streaks, background haze, ghosting, and repeating marks on every colour print. Replacing just the blade restores the belt's cleaning action without needing a full transfer belt assembly.
- Compatible part — new, produced to match OEM fit and material spec
- Blade only — for use where the waste toner section and belt frame are still serviceable
- 90-day Printer Genie warranty
- UK supplier, courier delivery, tracked
Is This The Right Part?
Toner left behind on the transfer belt shows up as thin vertical lines running down every colour page.
A faint repeat of a previous image or mark appearing at a regular interval down the page.
Prints look dirty or hazy across the whole page, even in areas that should be white.
Loose toner marks appear on the page, or you can see contamination inside the printer around the belt.
Specifications
| Component | Transfer belt cleaning blade — blade only, no waste toner section |
|---|---|
| Printer Genie part number | TBBCLP365-PG |
| Condition | Compatible — new, produced to match OEM fit and material spec |
| Compatible printer families | HP Colour Laser 150 / MFP 178 / MFP 179 and Samsung CLP / CLX / Xpress C-Series |
| Also fits within assembly | Complete transfer belt unit — JC93-01540A / JC93-01594A / JC96-06292A (same physical unit) |
| Quantity | 1 x transfer belt cleaning blade |
| Availability | In stock |
| Weight & delivery | Courier delivery, tracked |
Compatible Printers
| HP Colour Laser 150a, HP Colour Laser 150nw |
| HP Colour Laser MFP 178nw, HP Colour Laser MFP 179fnw, HP Colour Laser MFP 179fwg |
| Samsung CLP-360, Samsung CLP-365, Samsung CLP-368 |
| Samsung CLX-3300, Samsung CLX-3305 |
| Samsung Xpress C410W, C430, C430W, C460FW, C480, C480FN, C480FW, C480W |
Sold as a blade-only replacement. The complete transfer belt assembly and waste toner section are not included.
What's Included
- 1 x transfer belt cleaning blade (blade only)
- Compatible — new, produced to match OEM fit and material spec
Install Notes
- Power off and unplug the printer before starting.
- Remove the transfer belt assembly following the printer's service guidance.
- Clean any excess toner contamination from the belt and frame before fitting the new blade.
- Take care not to scratch or contaminate the transfer belt surface while working.
- Refit the assembly and run several colour test pages to confirm the fault has cleared.
Warranty & Support
90-day Printer Genie warranty — covers manufacturing or refurbishment defects under normal use. Full terms in our Terms & Conditions.
This is a spare part for engineer/technical fitting and does not include GenieCare™ Expert Support.
FAQ
Does this fit both HP and Samsung printers?
Yes. The HP Colour Laser 150, MFP 178 and MFP 179 series share the same print engine as the listed Samsung CLP, CLX and Xpress C-Series models, so this blade fits both ranges. Check your exact model against the compatible printers list above before ordering.
Is this the blade only, or the full transfer belt?
This listing is for the cleaning blade only. It does not include the waste toner section or the complete transfer belt assembly — use this if those parts are still in good working order and only the blade has failed.
What symptoms does a worn blade cause?
Vertical colour streaks, repeating marks, grey background haze, ghosting, and toner smearing on colour prints are all typical signs of a worn or contaminated transfer belt cleaning blade.
Do I need any special tools to fit this?
No special tools are required, but this is an internal component fit intended for engineers or confident technical users comfortable accessing the transfer belt assembly.
