HP
HP M806 M830 Booklet Maker/Finisher CZ285A — 90-Day Warranty & GenieCare™
HP M806 M830 Booklet Maker/Finisher CZ285A — 90-Day Warranty & GenieCare™
Couldn't load pickup availability
New Genuine HP
HP CZ285A Booklet Maker/Finisher — for LaserJet Enterprise M806 & M830
Finish booklets, stapled sets and stacked output in-houseSaddle-stitch booklet making, stapling and offset stacking for the HP LaserJet Enterprise M806 and Enterprise flow MFP M830 — straight from the printer.
|
|
Who Is This Accessory For?
| In-house booklet and report productionProduce booklets, programmes, manuals and stitched reports on site — saddle-stitched and folded automatically, with no need to send jobs to a print shop. | High-volume document finishingLarge stapled or collated print runs are offset-stacked and stapled automatically — output arrives sorted and ready to distribute. |
| Print rooms and reprographics teamsShared enterprise MFPs serving a whole department turn a standard print job straight into a finished, bound document. | Bringing finishing costs in-houseIf you currently pay an external print shop for stapling, folding or booklet binding, this brings that cost and turnaround time in-house. |
Specifications
| Accessory type | Booklet Maker/Finisher — staple, offset stack, saddle-stitch booklet making |
| OEM part number | CZ285A |
| Alternative part numbers | None known |
| Condition | New genuine HP |
| Capacity / key spec | Up to 3,000 sheets total output capacity (HP-rated) |
| Supported media | Plain paper — supports the printer's standard sizes for stapling, stacking and saddle-stitch booklet making |
| Compatible printers | HP LaserJet Enterprise M806dn, M806x+, M806x+ NFC/Wireless Direct; Enterprise flow MFP M830z, M830z NFC/Wireless Direct |
| Installation | Floor-standing module — docks to the printer's output side; two-person or professional installation recommended |
| Dimensions (W×D×H) | 854 × 668 × 1093 mm |
| Weight & delivery | 87 kg unit weight — shipped on pallet, 115 kg gross, 1095 × 848 × 1281 mm carton |
Compatible Printers
This finisher fits the following HP models. If your model is not listed, check your printer's accessory list or contact us before ordering — some models within a family use different accessory part numbers.
| Model | Part Number Confirmed | Notes |
| HP LaserJet Enterprise M806dn (CZ244A) | CZ285A | Standalone print-only model |
| HP LaserJet Enterprise M806x+ (CZ245A) | CZ285A | Higher-spec print-only variant |
| HP LaserJet Enterprise M806x+ NFC/Wireless Direct (D7P69A) | CZ285A | Wireless direct built in |
| HP LaserJet Enterprise flow MFP M830z (CF367A) | CZ285A | MFP — print, copy, scan, fax |
| HP LaserJet Enterprise flow MFP M830z NFC/Wireless Direct (D7P68A) | CZ285A | MFP, wireless direct built in |
What's Included
- 1 × HP LaserJet Booklet Maker/Finisher (CZ285A)
- Installation guide
- 90-day Printer Genie warranty
- 30 days GenieCare™ Expert Support — included free from date of purchase
- GenieCare™ Expert Support continues when you order toner from us
Installation Notes
This is a substantial floor-standing unit (87 kg). Unlike small clip-on accessories, we recommend two people or a professional installer for unpacking and positioning, and adequate floor space alongside the printer before delivery.
- Power off the printer and disconnect from the mains.
- Position the finisher alongside the printer's output side, allowing clearance for trays and doors to open fully.
- Dock the finisher to the printer's output bridge and secure as per the installation guide.
- Reconnect the printer to the mains.
- Power on — the printer should automatically detect the accessory and configure it.
- If the accessory is not recognised, check the printer driver is updated to reflect the new output device and confirm the output-bridge connection is fully seated.
If the printer does not recognise the accessory after fitting, message our GenieCare™ Expert Support team — we can help with driver configuration, firmware checks and output-option setup. GenieCare™ Expert Support is remote written guidance and does not include on-site physical installation.
Warranty
90-day Printer Genie warranty included. This accessory is covered for defects under normal use for 90 days from date of purchase.
The warranty does not cover accidental damage, incorrect installation, misuse, electrical damage, physical damage, contamination, use in an unsuitable printer, or abnormal wear caused by excessive usage beyond the expected service life.
Full warranty terms are available in our Terms of Service. GenieCare™ Expert Support is separate from the product warranty and covers remote guidance, diagnosis and advice.
Support
30 days GenieCare™ Expert Support — included free from date of purchase. Message our team for help with driver and firmware configuration, output-bridge connection troubleshooting, and diagnosis if the accessory is not recognised or functioning correctly.
GenieCare™ Expert Support continues — order your HP 25X (CF325X) toner from Printer Genie and support carries on automatically. No subscription. No sign-up.
GenieCare™ Expert Support covers remote written diagnosis, guidance and advice. It is separate from and in addition to the 90-day Printer Genie warranty. It does not include on-site physical installation.
GenieCare™ Expert Support – Included with This Accessory
Frequently Asked Questions
