1 1

Printer Genie Ltd

HP RM1-4436 Transfer Belt CP1215 CP1525 CM1415 — 6-Month Warranty & GenieCare™

HP RM1-4436 Transfer Belt CP1215 CP1525 CM1415 — 6-Month Warranty & GenieCare™

£70.00 GBP
£70.00 GBP
Sale Sold out
Shipping calculated at checkout.
Fulfilment
Condition: Refurbished

Refurbished

UK refurbishment specialist Rebuilt and warranted GenieCare™ support included

HP RM1-4436 Transfer Belt CP1215 CP1525 CM1415 — 6-Month Warranty & GenieCare™

Restore Correct Colour Transfer and Registration

Refurbished transfer belt unit for HP Colour LaserJet CP1215, CP1515, CP1518, CP1525, CM1312 and CM1415 series printers

  • Direct-fit intermediate transfer belt (ITB) assembly — OEM part number RM1-4436
  • Also sold under alias RM1-7866 — same physical part across the full model range
  • Printer Genie refurbished — fully stripped down and rebuilt with new components as standard before despatch
  • Corrects colour registration, ghosting, background haze, and repeating image defects
  • UK supplier — despatched from our warehouse
  • 30 days GenieCare™ Expert Support — installation and calibration guidance included
  • GenieCare™ Expert Support continues when you order toner from us
 HP RM1-4436 Transfer Belt Unit | Printer Genie UK

Is This the Right Transfer Belt?

Colour banding, lines, or streaks on colour printsHorizontal lines, banding, or streaks across colour pages — particularly when they repeat at regular intervals — often point to a worn or scratched transfer belt. Transfer belt warning or end-of-life messageError messages such as 59.X Transfer Motor Error, 59.00, 59.10 or 59.20 indicate the transfer belt has reached end of life or has failed. Replacing the belt clears these warnings.
Colour registration issues or misalignmentWhen cyan, magenta, yellow, or black don't line up correctly, the transfer belt is a common cause, along with drum units. Run a colour registration calibration after fitting to confirm. Proactive maintenance or high page countIf the transfer belt is part of your scheduled maintenance or your printer's supplies page is showing low belt life, replacing it now avoids print quality issues and unplanned downtime.
Toner contamination inside the printerA cracked or damaged transfer belt can release toner inside the printer, causing visible contamination on internal components or the underside of pages. Not sure? Ask us firstColour print quality faults can have several causes — transfer belt, drum units, toner, or calibration. Contact us before ordering if you're not certain.

Specifications

Component Transfer belt (intermediate transfer belt assembly)
Primary OEM part number RM1-4436
Alternative part numbers RM1-7866
Condition Refurbished — fully stripped down and rebuilt with new components as standard
Availability Refurbished stock — despatched from our warehouse
Compatible printers HP Colour LaserJet CP1215 / CP1515 / CP1518 / CP1525, CM1312 / CM1415 series — see full list below
Counter reset required Not normally required — the printer detects the new belt automatically. If a supplies warning persists, this can be cleared via the service menu.
Calibration after fitting Recommended — run a colour registration calibration from the printer menu after fitting
Weight & delivery Courier delivery, tracked

Compatible Printers

This transfer belt fits the following HP models. If your model is not listed, contact us before ordering — we may be able to confirm compatibility.

HP Colour LaserJet CP1215
HP Colour LaserJet CP1515n
HP Colour LaserJet CP1518ni
HP Colour LaserJet Pro CP1525n, CP1525nw
HP Colour LaserJet CM1312 MFP, CM1312nfi MFP
HP LaserJet Pro CM1415fn, CM1415fnw

What's Included

  • 1 × HP transfer belt unit (RM1-4436), refurbished
  • 30 days GenieCare™ Expert Support — installation guidance included from date of purchase
  • GenieCare™ Expert Support continues when you order toner from us

Installation Notes

Handle the transfer belt with care. Do not touch the belt surface — even small amounts of skin oil or debris can cause print quality issues. Keep the belt in its packaging until you are ready to fit it.

  1. Power off the printer and disconnect from the mains.
  2. Open the front or top access panel and remove the toner cartridges to access the transfer belt.
  3. Release the belt locking levers/screws as per your model's service guidance and lift the old belt clear.
  4. Check the surrounding rollers and cartridge bays for toner contamination and clean before fitting the new belt.
  5. Insert the new transfer belt carefully — do not touch the belt surface.
  6. Reinstall toner cartridges and close all panels.
  7. Power on and run a colour registration calibration from the printer menu.
  8. If a supplies warning persists after fitting, reset via the service menu — contact GenieCare™ Expert Support if you need help locating this.

If you need help at any step, contact us via the GenieCare™ Expert Support channel — installation guidance is included with this purchase.

Warranty & Support

6-month Printer Genie warranty — covers refurbishment defects and component failure under normal use. Does not cover incorrect installation, physical damage, electrical damage, misuse, abnormal wear, or faults elsewhere in the printer. Full terms in our Terms & Conditions.

30 days GenieCare™ Expert Support included free — installation guidance, calibration help, and diagnosis if print quality issues persist after fitting. Order HP toner from Printer Genie after fitting and support continues automatically — no subscription, no sign-up.

GenieCare™ Expert Support is separate from and in addition to the warranty — it covers remote diagnosis and advice, not on-site repair.

GenieCare™ Expert Support – Included with This Part

GenieCare Expert Support | Printer Genie UK

30 days installation support — then keeps going as long as you buy toner from us

Order your HP toner from Printer Genie after fitting this belt and GenieCare™ Expert Support stays active. Real printer experts. No call centres. No subscription.

GenieCare™ Expert Support covers

Transfer belt installation guidance Colour calibration after fitting
Supplies warning / reset guidance Fault diagnosis if not fully resolved

Order the right HP toner to keep GenieCare™ Expert Support active

This transfer belt covers two HP toner generations depending on your exact model — check which one your printer uses before ordering:

CP1215 / CP1515 / CP1518 / CM1312 — HP 125A series
Black CB540A
Cyan / Magenta / Yellow CB541A / CB542A / CB543A
CP1525 / CM1415 — HP 128A series
Black CE320A
Cyan / Magenta / Yellow CE321A / CE322A / CE323A
Fit this belt → 30 days support free → Order HP toner → Keep buying toner — support never stops

GenieCare™ Expert Support stays active with each toner order — no subscription, no sign-up. Covers remote diagnosis, guidance, and advice. Does not replace any product warranty.

Frequently Asked Questions

What symptoms suggest the transfer belt needs replacing?

The most common signs are banding or lines on colour prints, colour misalignment or registration issues, toner contamination inside the printer, or a belt end-of-life warning on the display. If you're not certain the belt is the problem, contact us before ordering.

Do I need to run a calibration after fitting?

Yes — we recommend running a colour registration calibration from the printer menu after fitting any new transfer belt. This ensures all four colour planes are aligned correctly and takes a few minutes. Our GenieCare™ Expert Support team can walk you through this if needed.

Is RM1-7866 the same part as RM1-4436?

Yes — RM1-4436 and RM1-7866 are the same physical transfer belt unit, referenced differently depending on which HP catalogue revision or distributor you're looking at. You'll receive the same part regardless of which number you searched.

Is GenieCare™ Expert Support the same as the warranty?

No — they're separate. The warranty covers component failure; GenieCare™ Expert Support covers installation guidance and ongoing advice. Full details on both are in the Warranty & Support section above.

View full details