1
/
of
1
Printer Genie
HP LaserJet M775 Fuser Unit RM1-9373 CE515A CC522-67926
HP LaserJet M775 Fuser Unit RM1-9373 CE515A CC522-67926
Regular price
£155.00 GBP
Regular price
Sale price
£155.00 GBP
Unit price
/
per
Shipping calculated at checkout.
Condition: Refurbished
Couldn't load pickup availability
HP LaserJet Enterprise 700 Colour M775 Series Fuser Unit – RM1-9373 – Installation Support Available
Condition: Refurbished
Restore correct heat and pressure performance with this refurbished fuser unit. Designed to resolve common fuser-related print faults including smudging, ghosting, poor toner adhesion, and fuser end-of-life warnings.
This refurbished fuser unit has been professionally cleaned, tested, and verified for correct operating temperature and pressure. Wear components are inspected and replaced where required.
Highlights
- Direct-fit fuser unit for HP LaserJet Enterprise 700 Colour M775 Series
- OEM Part Number: RM1-9373 (aliases: CE515A, CC522-67926)
- Rated life: 150,000 pages (manufacturer reference)
- Fully tested and inspected (refurbished units)
- Printer Genie expert email installation support available
Specifications
| Component | Fuser Unit (complete assembly) |
|---|---|
| OEM References | RM1-9373; CE515A; CC522-67926 |
| Condition | Refurbished |
| Rated Life | 150,000 pages |
| Fitment | Rear-mounted fuser assembly |
What’s Included
- 1 × HP LaserJet Enterprise 700 Colour M775 Series Fuser Unit
Compatibility
View Compatible Models
- HP LaserJet Enterprise 700 Colour MFP M775dn
- HP LaserJet Enterprise 700 Colour MFP M775f
- HP LaserJet Enterprise 700 Colour MFP M775z
- HP LaserJet Enterprise 700 Colour MFP M775z+
Install Notes (Quick)
- Power off and unplug the printer; allow the fuser to cool fully.
- Remove the rear access panel and release the fuser locking levers.
- Install the new unit and reset the fuser counter if required.
Fuser-related error messages and fault symptoms
HP fuser errors and messages
- Replace Fuser Kit
- Fuser Life Warning
- 50.x Fuser Error (50.1, 50.2, 50.7)
- 50.7F – Fuser failure
- Printer reports fuser end of life
Print quality faults caused by a failing fuser (no error code)
- Toner smudging or rubbing off the page
- Ghosting or repeated images down the page
- Wrinkled or curled paper after printing
- Uneven gloss or patchy toner adhesion
- Toner flakes inside the printer
- Pages feel hot but toner is not bonded correctly
Common print problems customers report (no error code shown)
- Ink rubbing off the paper
- Print smears when touched
- Toner coming off on fingers
- Print looks wet or unfinished
- Text smudges after printing
- Pages sticking together when warm
- Paper coming out wrinkled or crinkled
- Paper curling after printing
- Repeated marks or shadows down the page
- The same image repeating lower on the page
- Printer printing but ink not sticking
- Paper feels hot but print wipes off
Disclaimer: Fuser-related errors and print defects may have multiple causes. Replacing the fuser unit may not resolve all issues. Further diagnosis may be required.
Share
