Printer Genie Ltd
HP RM2-3430 220V Fuser Unit - LaserJet M209 M208 M207 M210 M211 M212
HP RM2-3430 220V Fuser Unit - LaserJet M209 M208 M207 M210 M211 M212
Couldn't load pickup availability
Refurbished
UK refurbishment specialist Rebuilt and warranted GenieCare™ support included
HP RM2-3430 220V Fuser Unit - 6-Month Warranty & GenieCare™ Expert Support
Direct-fit refurbished fuser for the HP LaserJet M207-M212 series220V UK-spec fuser assembly for HP's entry-level LaserJet Pro range.
|
 |
Availability & Lead Time
Ready to Ship - held in stock, order by 2pm for same-day despatch (next working day if the cut-off's been missed). Refurb to Order - rebuilt specifically for your order, ships in 5-8 working days. Choose your option above using the dropdown next to the price. We don't refurbish this part until it's ordered unless we're holding ready stock, so every unit is properly stripped down and rebuilt rather than reconditioned in bulk ahead of time.
Why Buy This Fuser from Printer Genie?
| 6-month Printer Genie warrantyCovers refurbishment defects and component failure under normal use. Full warranty terms are available in our Terms of Service. | GenieCare™ support included30 days installation guidance and fault diagnosis support from real printer specialists. |
| Professionally refurbished by Printer GenieEvery unit is fully stripped down and rebuilt with new components as standard before despatch. | Help if the fault is not the fuserIf the supplied fuser does not fully resolve your printer issue, we will help diagnose the remaining fault and recommend the next steps. |
Is This the Right Fuser Unit?
| You're seeing smudging or toner rub-offToner that wipes off the page or smears when touched is the classic sign of a failing fuser. The fuser is responsible for bonding toner to paper using heat - when it fails, toner never properly fuses. | Your printer is showing a fuser errorCode 50.1 means the fuser is too cold, 50.2 means it isn't heating up fast enough, and 50.3 means it's running too hot. All three point to the fuser unit. |
| You're seeing ghosting or repeated imagesA faint repeated shadow of previously printed content appearing lower on the page (ghosting) often points to a worn fuser roller or fuser film. A new fuser unit resolves this in most cases. | Proactive maintenance or high page countOn a heavy-use machine, replacing the fuser proactively avoids print quality issues and unplanned downtime. |
| Paper curling or wrinkling after printingIf pages are coming out curled, wrinkled, or wavy, the fuser is applying uneven heat or pressure. This is a mechanical sign of fuser wear rather than a print quality issue. | Not sure? Ask us firstIf you're unsure whether the fuser is the right part to fix your issue, contact us before ordering. Our team can help diagnose the fault - we'd rather help you buy the right part than the wrong one. |
Specifications
| Component | Fuser unit (complete assembly) |
| Primary OEM part number | RM2-3430 |
| Alternative part numbers | RM2-3428 (110V version - different SKU, not this listing) |
| Condition | Refurbished |
| Availability | Ready to Ship (same-day if ordered by 2pm) or Refurb to Order (5-8 working days) - select above near Add to Cart |
| Rated life | [RATED_LIFE: confirm pages] |
| Compatible printers | HP LaserJet M207, M208, M209, M210, M211 and M212 - full model list below |
| Fuser counter reset required | Not typically required on this consumer-tier printer - usually self-detects the new fuser automatically |
| Weight & delivery | Courier delivery, tracked - [WEIGHT_DELIVERY: confirm packed weight] |
Compatible Printers
This fuser unit fits the following HP models. If your model is not listed, contact us before ordering - we may be able to confirm compatibility.
| Model | Part Number Confirmed | Notes |
| HP LaserJet M207 | RM2-3430 | 220V |
| HP LaserJet M208 | RM2-3430 | 220V |
| HP LaserJet M209 | RM2-3430 | 220V |
| HP LaserJet M210 | RM2-3430 | 220V |
| HP LaserJet M211 | RM2-3430 | 220V |
| HP LaserJet M212 | RM2-3430 | 220V |
What's Included
- 1 x HP fuser unit (RM2-3430)
- 6-month Printer Genie warranty for refurbishment defects and component failure under normal use
- 30 days GenieCare™ Expert Support - installation guidance included from date of purchase
- GenieCare™ Expert Support continues when you order toner from us
Installation Notes
Important - fuser units get very hot during normal operation. Always power off the printer and allow the fuser to cool fully before handling. Do not touch the fuser roller surface.
- Power off the printer and disconnect from the mains. Allow at least 30 minutes to cool.
- Open the rear access panel to reach the fuser.
- Release the fuser locking levers.
- Slide the old fuser unit out carefully - dispose of responsibly.
- Insert the new fuser unit and engage the locking levers until they click.
- Close the rear panel, reconnect power, and power on.
- Run a test print to confirm the fault has cleared.
If you need help at any step, our team is available. Contact us via the GenieCare™ Expert Support channel - installation guidance is included with this purchase.
Warranty & Support
6-month Printer Genie warranty - covers refurbishment defects and component failure under normal use. Does not cover accidental damage, incorrect installation, misuse, electrical or physical damage, contamination, use in an unsuitable printer, or wear beyond expected service life. Full terms in our Terms of Service.
30 days GenieCare™ Expert Support included free - installation guidance and diagnosis if the fault isn't fully resolved. Order your HP toner from Printer Genie after fitting and support continues automatically - no subscription, no sign-up.
GenieCare™ Expert Support is separate from and in addition to the warranty - it covers remote diagnosis and advice, not on-site repair.
GenieCare™ Expert Support - Included with This Part
Frequently Asked Questions
