Paper jam? Printer not feeding?

A printer that has started jamming or missing sheets is usually telling you its rubber has worn, not that the machine is finished. On a printer of this generation that is a few pounds of parts and a bench job, rather than a replacement.

Replacement paper feed components for the HP LaserJet 9050N and HP LaserJet Q3722A.

• New parts throughout — no refurbished components
• No special tools required for installation
• Parts only — no fitting support, for engineers and confident self-fitters
• UK supplier — despatched from our warehouse

All components are new. Only the trays this kit covers are listed.

This kit fits the following models. If your exact model has regional or managed variants, contact us before ordering.

1. Power off and unplug the printer, and let the fuser area cool before working near it.
2. Remove the paper tray and locate the pickup roller and separation pad or roller in the feed assembly.
3. Replace each component supplied in the kit — check orientation and make sure every part is fully seated.
4. Handle new rollers by the hubs. Skin oils on the rubber surface reduce grip.
5. Clean adjacent feed surfaces with isopropyl wipes if they are contaminated with paper dust or toner.
6. Reassemble, then run 10 to 20 test prints from each tray to confirm feeding is stable.

90-day Printer Genie warranty — covers manufacturing or refurbishment defects under normal use. Does not cover incorrect installation, physical damage, electrical damage, misuse, abnormal wear, or faults elsewhere in the printer. Full terms in our Terms & Conditions.

This is the parts-only kit — supplied without fitting support and without a refund guarantee. It is intended for engineers and confident self-fitters. If you would rather have 30 days of fault-specific support and a no-quibble refund if the kit does not resolve your jam, our JamFix® kits include both — see the JamFix® Repair Kits range for the models it covers.