1
/
of
1
Printer Genie Ltd
HP Colour LaserJet Pro M154 M180 M181 M252 M277 Fuser Unit RM2-2500 RM2-5582
HP Colour LaserJet Pro M154 M180 M181 M252 M277 Fuser Unit RM2-2500 RM2-5582
Regular price
£75.00 GBP
Regular price
Sale price
£75.00 GBP
Unit price
/
per
Shipping calculated at checkout.
Condition: Refurbished
Couldn't load pickup availability
HP Colour LaserJet Pro M154 M180 M181 Fuser Unit – RM2-2500 / RM2-5582
Condition: Refurbished
Restore correct heat and pressure performance with this refurbished fuser unit. Designed to resolve common fuser-related print faults including smudging, ghosting, poor toner adhesion, and fuser end-of-life warnings.
This refurbished fuser unit has been professionally cleaned, tested, and verified for correct operating temperature and pressure. Wear components are inspected and replaced where required.
Highlights
- Direct-fit simplex fuser unit for selected HP Colour LaserJet Pro printers
- OEM Part Numbers: RM2-2500 / RM2-5582
- 220V simplex fuser assembly
- Helps restore correct toner bonding and heat performance
- Fully tested and inspected
- Printer Genie expert email installation support available
Specifications
| Component | Fuser Unit (complete assembly) |
|---|---|
| OEM References | RM2-2500; RM2-5582 |
| Condition | Refurbished |
| Voltage | 220V |
| Fitment | Simplex (non-duplex) models |
What’s Included
- 1 × HP Colour LaserJet Pro Fuser Unit
Compatibility
View Compatible Models
- HP Colour LaserJet Pro M154a
- HP Colour LaserJet Pro M154nw
- HP Colour LaserJet Pro M180n
- HP Colour LaserJet Pro M181fw
- HP Colour LaserJet Pro M252n
- HP Colour LaserJet Pro M274n
- HP Colour LaserJet Pro M277n
Install Notes (Quick)
- Power off and unplug the printer; allow the fuser to cool fully.
- Check your existing fuser part number before ordering.
- This fuser is for simplex (non-duplex) models.
- Install the replacement unit and reset the fuser counter if required.
Fuser-related error messages and fault symptoms
HP fuser errors and messages
- Replace Fuser Kit
- Fuser Life Warning
- 50.x Fuser Error
- Printer reports fuser end of life
- RM2-2500 fuser unit
- RM2-5582 fuser unit
- HP M181 fuser replacement
- HP M180 fuser unit
- HP M154 fuser replacement
- HP M252 fuser unit
- HP M274 fuser replacement
- HP M277 fuser unit
- HP Colour LaserJet Pro simplex fuser
Print quality faults caused by a failing fuser
- Toner smudging or rubbing off the page
- Ghosting or repeated images down the page
- Wrinkled or curled paper after printing
- Uneven gloss or patchy toner adhesion
- Toner flakes inside the printer
- Pages feel hot but toner is not bonded correctly
Common print problems customers report
- Ink rubbing off the paper
- Print smears when touched
- Toner coming off on fingers
- Print looks wet or unfinished
- Text smudges after printing
- Pages sticking together when warm
- Paper curling after printing
- Repeated marks or shadows down the page
- Printer printing but toner not sticking
Disclaimer: Fuser-related errors and print defects may have multiple causes. Replacing the fuser unit may not resolve all issues. Further diagnosis may be required.
Share
